brocade-communications-sy rfs6000 用户手册
416
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Interface config commands
12
management
Sets the selected interface as management interface. It can only be used on a VLANx interface.
The TFTP/FTP server providing the controller its config file at startup must be accessible via this
interface.
The TFTP/FTP server providing the controller its config file at startup must be accessible via this
interface.
VLAN 1 is the default management interface for the controller.
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
management
Parameters
None
None
Usage Guidelines
The management privilege can be set only on a L3 interface. Use this command along with the
The management privilege can be set only on a L3 interface. Use this command along with the
(config) management secure
in the config mode. This ensure management access is restricted
to the management VLAN only
for
management
configuration.
Example
RFController(config)#interface vlan 1000
RFController(config-if)#management
RFController(config-if)#