INSTEON 2441zth 用户手册

Page 21 of 27 Rev: 1/21/2014 8:36 AM

4) When blinking/beeping stops, release Set button

Device goes into factory reset for ~10 seconds and will perform a series of self tests
Device will return to normal operations and display screen returns to normal

5) If INSTEON Wireless Thermostat displays a two-digit error code instead of the ambient temperature,

remove batteries, wait a few seconds, then reinstall

If problem persists, call INSTEON Support Line at 800-762-7845

Factory Reset Option 2
1) Press and hold INSTEON Wireless Thermostat Set button until it beeps

INSTEON Wireless Thermostat will beep
INSTEON Wireless Thermostat Set LED will blink green

2) Press and hold INSTEON Wireless Thermostat Set button again until it beeps

INSTEON Wireless Thermostat will beep
INSTEON Wireless Thermostat Set LED will blink red
LCD display indicates the group you are removing a scene from (default is Cooling)

3) Double-tap Set button
4) Press and hold Set button again. Do not let go of Set button.

Device will blink all segments and emit a long beep

5) When blinking/beeping stops, release Set button

Device goes into factory reset for about 10 seconds and will perform a series of self tests
Device will return to normal operations and display screen returns to normal

6) If INSTEON Wireless Thermostat displays a two-digit error code instead of the ambient temperature,

remove batteries, wait a few seconds, then reinstall

If problem persists, call INSTEON Support Line at 800-762-7845

Specifications

General

Product name

INSTEON Wireless Thermostat

Brand/manufacturer

INSTEON

Manufacturer product number

2441ZTH US/Can

2732-432 EU

2732-532 AUS/NZ

UPC

813922-010824 US/Can

813922-012873 EU

813922-012880 AUS/NZ

Warranty

2 years, limited

INSTEON

INSTEON powerline mesh repeater

INSTEON RF mesh repeater

Yes (only if using external power supply)

INSTEON controller

Yes

INSTEON responder

Maximum links/scenes

400