Konica Minolta di1610f um gdi 1.1.1 用户手册
Copier Control Panel Operations (PC Print Mode)
4
Di1610f GDI Printer Controller
4-3
G
If the machine is in the copy mode when a print command is executed
on a connected computer, it will switch to PC print if no operation is
performed in the copy mode for 30 seconds. This machine will not
receive print data unless 30 seconds pass after it has completed its
last copy operation.
on a connected computer, it will switch to PC print if no operation is
performed in the copy mode for 30 seconds. This machine will not
receive print data unless 30 seconds pass after it has completed its
last copy operation.
G
If PC print data is received while a fax operation is being performed,
the machine will switch to the PC print mode and print the data after
the end of the fax mode job is reached.
the machine will switch to the PC print mode and print the data after
the end of the fax mode job is reached.
G
If a high-priority PC print job is received while a low-priority fax
operation is being performed, the machine will interrupt the fax
operation and enter the PC print mode to print the job. The fax
operation will resume after the PC print job is complete.
operation is being performed, the machine will interrupt the fax
operation and enter the PC print mode to print the job. The fax
operation will resume after the PC print job is complete.
G
When there is print data in machine
memory (indicated by “[PC PRN]” or
“PC:PRN” on the display and a lit
“Printer” indicator), pressing the
[Printer] key enters the PC print
mode. The machine will beep and
the PC print mode will not be
entered if there is no print data in
machine memory when the [Printer]
key is pressed.
memory (indicated by “[PC PRN]” or
“PC:PRN” on the display and a lit
“Printer” indicator), pressing the
[Printer] key enters the PC print
mode. The machine will beep and
the PC print mode will not be
entered if there is no print data in
machine memory when the [Printer]
key is pressed.
G
Pressing the [Fax], [Scan], or [Copy] key exits the PC print mode.
G
After printing is finished, the machine automatically switches to the
mode it was in before the print operation started.
mode it was in before the print operation started.