Kompernass parkside pss 310-kh 3123 planslip 用户手册
PSS 310 ORBITAL SANDER
For effortless sanding of metal, wood and varnish/paint …
Dear Customer! We are delighted that you have decided to purchase our high quality PSS 310 orbital sander.
Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first
time and that you understand how to handle electrical power tools correctly. Please read the operating
instructions below and the accompanying safety advice carefully. Use the equipment only as
described and for the indicated purposes. By doing this you will be able to work in complete safety and produce
better results. We hope you enjoy using your sander.
Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first
time and that you understand how to handle electrical power tools correctly. Please read the operating
instructions below and the accompanying safety advice carefully. Use the equipment only as
described and for the indicated purposes. By doing this you will be able to work in complete safety and produce
better results. We hope you enjoy using your sander.
PROPER USE
The orbital sander is intended for sanding wood, metal and paint. Always use a sanding sheet and grade that are
suitable for the particular surface you are sanding. The speed selected should also be appropriate.
suitable for the particular surface you are sanding. The speed selected should also be appropriate.
FEATURES OF THE PSS 310
Clip
Handle
Sanding sheet
ON / OFF switch
Base
Adjuster wheel
Air vents
Dust extraction nozzle (Fig.)
Dust bag adapter
,
,
,
= accessories supplied
Paper dust bag
TECHNICAL INFORMATION
Nominal power:
310 W
Nominal voltage:
230 V ~ 50 Hz
Low load speed:
n 7,000 – 11,000/min
Dust extraction system: built-in extraction system /
Orbits: max. approx.
22,000/min
or with exterior suction device
Pad size:
225 x 115 mm
Weight:
2.25 kg
Orbit:
2.1 mm
Sanding sheet size max: approx.: 280 x 115 mm
The A weighted noise level of the equipment is
Protection class:
II
typically:
Sound pressure level: 70.0 dB(A)
The acceleration value is typically 2.5 m/s
Sound pressure level: 70.0 dB(A)
The acceleration value is typically 2.5 m/s
2
(vibration)
IMPORTANT SAFETY ADVICE
•
To be read in conjunction with the advice in the accompanying booklet on safety.
•
The sander is not designed for wet sanding and therefore is only to be used for dry sanding
•
Do not use the sander on materials containing asbestos
•
Look after your health: Wear ear defenders - also wear safety glasses and a breathing /dust mask
•
Take note that working with stone and wood can give rise to dusts that can damage your health.
•
Always keep the power cable well out of the sander's working area and fed to the rear of the machine.
!
!
4
www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
w
o
4 manual GB (+IRL)_Helv 17.06.2003 14:21 Uhr Seite 4