Honeywell niagara cp-700 用户手册

23

95-7776—03

4. Unplug the NiMH battery from the main board connector (see Fig. 12).

5. Using a 1/4" (6mm) nutdriver, unfasten and retain the two kep nuts that secure the metal battery bracket to the shield, and 

remove the shield and battery pack.

6. Put the replacement battery into the metal shield, and refasten back into place on the shield, using the two kep nuts. Hand 

tighten with a nutdriver.

7. Plug the battery connector plug of the replacement battery into the NiMH battery connector on the main board of the WEB/

CP-700. The connector is keyed—you cannot plug the battery in reversed.

8. Replace the cover.

9. Restore power to the WEB/CP-700 and verify normal operation.

Please dispose of the used NiMH battery in accordance with local, state, and federal regulations.

If regulations specify returning the old battery to a recycling center, but no acceptable recycling center can be found, please 

return the old NiMH battery pack to Tridium for proper disposal.

Servicing the WEB/CP-700 may call for replacement parts. There are three categories of parts: 

• Non-replaceable Parts

• Standard Replacement Parts

• New Replacement Unit

The WEB/CP-700 contains a non-user replaceable 2.5A slow-blow fuse, soldered on the main circuit board. This fuse provides 

protection from internal shorts or connection to incorrect power supplies. If the fuse circuitry is suspect, contact your regional 

Tridium office for technical support. See “Returning a Defective Unit” on page 25.

Standard replacement parts are listed in Table 5, and can be ordered from stock without restriction. Standard replacement parts 

cannot be returned for credit and should be disposed of in an appropriate manner.

To replace an entire unit, order and install a 

new WEB/CP-700. If the faulty WEB/CP-700 is still in warranty, you can receive 

credit by returning it to Tridium. Be sure to contact Tridium for a return authorization (RA) number before shipping an item for 

return credit. See Returning a Defective Unit, page 25, for more details.

NPB-BATT-7

NiMH Battery Pack—see Required NiMH Battery Maintenance, page 22

NPM-1GB

1 GB DDR-2 333MHz SODIMM memory module (upgrade)

H11696

Hardware Bag for WEB/CP-700, containing screw terminal connector plugs (two 6-position, 

one 2-position, earth grounding wire).

712BNP

SLA 12V 7AH External backup battery.