MINOURA hyperbrain 用户手册

S - Current Speed  0.0(3.0) to 65.9mile/h [27inch] 

±

The Current Speed is displayed on main display (upper line) and updated once a second.

O - Total Distance (Odometer)  0.0 to 99,999 mile 

±

Continuously measured unless all clear operation is done.  At 10,000 miles(km), the increment becomes 1 mile(km).  At

100,000 miles(km), it returns to zero and counting begins anew.

M - Maximum Speed  0.0(3.0) to 65.9mile/h 

±

With Reset operation, it returns to zero and counting begins anew.

A - Average Speed  0.0 to 65.9 mile/h 

±

The average speed from start to current point is displayed within 27 hours 46 minutes 39 seconds (99,999 seconds) or 999.99

miles (km).  If either is exceeded, (.E) is displayed and calculation ceases.

D - Trip Distance  0.00 to 999.99 mile 

±

The trip distance from start to current point is displayed.  With Reset operation, it returns to zero.

T - Elapsed Time  0:00'00" to 9:59'59" 

±

Elapsed time is measured from start to current point, in units of hours, minutes and seconds.  At 10 hours, it returns to zero and

counting begins anew.  With Reset operation, it returns to zero.

24-hour Clock 0:00' to 23:59' 

±

The Current Time is displayed as a 24-hour Clock on the sub-display.

The HyperBrain has an automatic Start/Stop function (Auto function).  This Auto function switches on/off the unit to start or

stop automatically.  You don't need to press the Start/Stop button each time when the Auto function is switched on.

To switch on/off the Auto function, set the main unit in the (T),(D), or (A) mode.  Press the Set button and the Auto function

will be switched on/off each time the button is pressed.  When the Auto function is switched on, the “AT” symbol appears.

When the main unit is left without receiving any input for 60-70 minutes continuously, the power will be automatically saved.

Then the main unit will display the clock time only.  Press either the Mode button or Start/Stop button to release Power

Saving mode. (The Power Saving mode is automatically released when the main unit receives signal from the sensor.)

1197-1 Godo, Anpachi, Gifu 503-2305 Japan

Phone (+81) 584-27-3131 / Fax (+81) 584-27-4258

Email : minoura@minoura.jp / URL : http://www.minoura.jp

1996 East Avenue, Hayward, CA 94541-5454 U.S.A.

Phone 1-510-538-8599  /  Fax 1-510-538-5899

Email : MinouraUSA@ATTglobal.net

MADE IN JAPAN