BBE Sound bmaxt 用户手册
Input
1. PASSIVE: This jack allows for the connection of a bass guitar with passive-pickups to the BMAX-T.
2. ACTIVE: This jack allows for the connection of a bass guitar with active-pickups to the BMAX-T. It is
attenuated, with respect to the “passive input”, by about 6dB to allow for the higher level output of
active-pickup systems.
active-pickup systems.
Pre-amp
3. BRIGHT: The Bright Switch connects a capacitor to the GAIN circuit creating a 10dB boost @ 10Khz.
4. GAIN: This controls the output of the preamp section post EQ.
5. 3-BAND INTERACTVE EQUALIZER: The Bass and Treble controls are mainly “boost” and the Mid
control only “cut”. While there is no absolutely flat position, the response is reasonably flat with the
controls set at TREBLE:2, MID:10, BASS: 2, with the bright switch off. The circuit can be described as
interacting, such that when all 3 tone controls are turned to 0 then no signal is passed at all.
controls set at TREBLE:2, MID:10, BASS: 2, with the bright switch off. The circuit can be described as
interacting, such that when all 3 tone controls are turned to 0 then no signal is passed at all.
Para-mids
6. FREQ: A range from 250hz to 1000hz is adjustable with the FREQ knob.
7. GAIN: This control is adjustable as follows:
3
FRONT PANEL CONNECTIONS
“0” = -12dB
“5” = 0dB
“10” = +12dB