BBE Sound bmaxt 用户手册

5

1. AC POWER CORD: This is a standard two-pronged AC power cable.

2. FUSE: Replace ONLY with same type Fastblow fuse. 

U.S., Canada & Japan models: .5A, 250VAC fast-blow type
All others: .250A, 250VAC fast-blow type

3. BBE: This jack allows remote in/out switching for the BBE Sonic Maximizer section of the BMAX-T. Please

use our (optional) FS-BMAX dual footswitch.

4. COMP: This jack allows remote in/out switching for the COMP section of the BMAX-T. Please use our

(optional) FS-BMAX dual footswitch.

5. GROUND LIFT: In the "up" position, use this switch to disable the ground pin of the XLR connector. This is

a useful feature in eliminating a ground loop between the BMAX-T and any subsequent component in the
signal chain.

6. DI OUT: This is a transformer balanced low impedance output. Use this output to feed long cable runs or

microphone level inputs on a mixing console or recorder

7. MAIN OUT: This unbalanced output is used to connect the BBE BMAX-T Pre-amp to the next subsequent

component in the system, i.e. power amplifier.

8. RETURN: Use this jack to connect the BMAX-T to an effects processor's output.  

9. SEND: Use this jack to connect the BMAX-T to an effects processor's input. The send jack can also be used