Panasonic DPMB311EU 操作指南

If the MlN light is OFF, turn it ON by pressing MlN.

If necessary, change the resolution and contrast
according to the type of document.
R To select the contrast, see page 57.
R To select the resolution, see page 57.

Dial the fax number.

When using the scanner glass, press MxN.
R The unit will scan 1 page. Wait until

“SCAN:PRESS OK” “SEND:PRESS START” is
displayed. Place the next document on the
scanner glass and press MOKN. Repeat this until
all the documents are scanned, then press MxN.

When using the automatic document feeder,
press MxN.

Note:
R By using the scanner glass, you can send pages from

booklets and small size pages.

R To stop sending, see page 98.
R You can change the default operation mode (feature

#463 on page 73) and the timer before returning to
the default operation mode (feature #464 on
page 73).

To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press MdN repeatedly to display “CONTRAST”.
2. Press MCN or MDN to change the contrast.
3. MOKN

Note:
R You can save the previous contrast setting (feature

To select the resolution
1. Press MdN repeatedly to display “RESOLUTION”.
2. Press MCN or MDN to change the resolution.

– “STANDARD”: For normal-sized characters.
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,

etc.

3. MOKN
R Using the “FINE”, “SUPER FINE” and “PHOTO”

settings will increase transmission time.

R You can change the default fax resolution (feature

To send 2-sided originals
1. Set the original in the automatic document feeder

2. MrN
3. Press MCN or MDN repeatedly to select the desired

binding of the original.

4. MOKN

Store the desired names and telephone numbers into the
address book beforehand (page 55).

Using address book
Press MWN, then press MCN or MDN repeatedly to display
the desired item.

Note:
R If the LDAP setting is activated beforehand

(page 92), select “LDAP SEARCH” or “ADDRESS
BOOK” by pressing MCN or MDN. A MOKN
For LDAP search, enter the name using the dial
keypad (up to 11 characters), then press MOKN to
start searching.

Using the one-touch dial feature
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press MgN, then press the desired station key.

To redial the last number
MTN

Note:
R To stop sending, see page 98.

Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is receiving a fax or sending a fax from memory.
– Up to 10 reservations when sending
– Up to 11 reservations when receiving
1. Set the original during fax reception or fax memory

transmission.

2. Enter the fax number using the dial keypad or

address book.

3. When using the scanner glass, press MxN. The unit

will scan 1 page. Place the next document on the
scanner glass and press MOKN. Repeat this until all
the documents are scanned, then press MxN.
When using the automatic document feeder,
press MxN.

R If the document exceeds the memory capacity, the

reservation for that document will be cancelled. You
must send the entire document manually.

57

9. . Fax