Panasonic KXTG6583 操作指南

16

phone is connected to the base 
unit. You are ready to make 
cellular calls.

To select which unit receives calls 
for the cellular line, press {OK} then 
continue from step 3, “Selecting 
which unit receives cellular calls”, 
page 16.
L

If not required, go to step 5.

{

OFF}

Note:
L

Make sure that your cellular phone is 
set to connect to this product 
automatically. Refer to your cellular 
phone’s operating instructions.

L

Make sure you cancel your cellular 
phone’s current registration if you 
want to register it to the other line 
(page 19).

You can select which unit rings and 
receives calls for a cellular line. When 
“All” is selected, all handsets and the 
base unit ring.

{

MENU}

For CELL 1: {#}{6}{2}{7}{1}
For CELL 2: {#}{6}{2}{7}{2}

{V}

/{^}: Select the desired handset 

or “All”.

{

SAVE} i {OFF}

Note:
L

When you select a specific handset to 
receive calls for a cellular line:
– other handsets cannot answer the 

calls.

– the base unit can answer the calls 

even though it does not ring. 
However, you can make the base 
unit ring by adjusting the base unit 
ringer volume (page 36).

L

When you change the setting to 
“All”, the base unit ringer volume 
also returns to the lowest level even if 
the ringer volume has been changed.

Once this feature is turned on, the 
handset and base unit ring using the 
same ringer tone as your cellular phone.
The following settings are available:
– “Off”: Turn this feature off to use the 

ringer tones of the handset and base 
unit. Caller information is announced 
depending on the Talking Caller ID 
setting (page 35).

– “On (with Talking CID)” 

(default): The handset and base unit 
use your cellular phone’s ringer tone. 
Caller information is announced even 
if the Talking Caller ID is turned off.

– “On (without Talking CID)”: 

The handset and base unit use your 
cellular phone’s ringer tone. Caller 
information is not announced even if 
the Talking Caller ID is turned on.

Important:
L

To use this feature, your cellular 
phone must support Bluetooth in-
band ringtone. Refer to your cellular 
phone’s operating instructions.

{

MENU}

For CELL 1: {#}{6}{1}{4}{1}
For CELL 2: {#}{6}{1}{4}{2}

{V}

/{^}: Select the desired setting.

{

SAVE} i {OFF}

Note:
L

The units use the preset ringer tones 
(page 36) instead of your cellular 

TG658x(e).book  Page 16  Friday, February 26, 2010  7:50 AM