Panasonic KXTG8063E 操作指南

45

I cannot activate the eco 
mode.

L

You cannot set eco mode when you set the repeater mode 
“On”. If required, set the repeater mode to “Off” (page 31).

I cannot register a 
handset to a base unit.

L

The maximum number of handsets (6) is already registered to 
the base unit. Cancel unused handset registrations from the 
base unit (page 31).

L

You entered the wrong PIN. If you forget your PIN, see “I 
cannot remember the PIN.” (page 45).

I cannot remember the 
PIN.

L

Change the PIN using the following method.

1

 (middle soft key) y132

*7zzz

Enter the new 4-digit base unit PIN. s M s {ic} 

The handset beeps and/or 
d

 flashes.

L

Battery charge is low. Fully charge the batteries (page 12).

I fully charged the 
batteries, but
– d still flashes or
– the operating time 

seems to be shorter.

L

Clean the battery ends (S, T) and the charge contacts with a 
dry cloth and charge again.

L

It is time to replace the batteries (page 12).

_

 is displayed.

L

The handset is too far from the base unit. Move closer.

L

The base unit’s AC adaptor is not properly connected. 
Reconnect AC adaptor to the base unit.

L

The handset is not registered to the base unit. Register it 
(page 30).

L

Activating one touch eco mode reduces the range of the base 
unit in standby mode. If required, turn eco mode off (page 17).

Noise is heard, sound cuts 
in and out.

L

You are using the handset or base unit in an area with high 
electrical interference. Re-position the base unit and use the 
handset away from sources of interference.

L

Move closer to the base unit.

L

If you use a DSL/ADSL service, we recommend connecting a 
DSL/ADSL filter between the base unit and the telephone line 
jack. Contact your DSL/ADSL provider for details.

L

Unplug the base unit’s AC adaptor to reset the unit and turn off 
the handset. Reconnect the adaptor, turn on the handset and 
try again.

TG8051_8061E(en).book  Page 45  Monday, February 20, 2017  9:47 AM