Panasonic KXMB2061E 操作指南

By using the scanner glass, you can send a page from
booklets or small size paper.

MResolutionN

MContrastN

MRedialN

MFaxN

MStartN

MSetN

If the MFaxN light is OFF, turn it ON by pressing
MFaxN.

If necessary, change the resolution and contrast
according to the type of document.
R To select the resolution, see page 56.
R To select the contrast, see page 56.

Dial the fax number.

Press MStartN to scan the document into memory.
Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.

Place the next page on the scanner glass. A MSetN
R To send more pages, repeat this step.

MStartN

Note:
R To stop sending, see page 107.
R You can change the default operation mode (feature

#463 on page 80) and the timer before returning to
the default operation mode (feature #464 on
page 80).

To select the resolution
1. Press MResolutionN repeatedly.

– “STANDARD”: For normal-sized characters.
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,

etc.

2. MSetN
R Using the “FINE”, “SUPER FINE” and “PHOTO”

settings will increase transmission time.

To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN

Note:
R You can save the previous contrast setting (feature

To redial the last number
MRedialN
R If the line is busy, the unit will automatically redial the

number up to 5 times.

Note:
R To stop sending, see page 107.

Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory

transmission.

2. Enter the fax number using the dial keypad,

one-touch dial or phonebook.

3. When using the scanner glass, press MStartN. The

unit will scan 1 page. Place the next document on the
scanner glass and press MSetN. Repeat this until all
the documents are scanned, then press MStartN.
When using the automatic document feeder,
press MStartN.

R If the document exceeds the memory capacity, the

reservation for that document will be cancelled. You
must send the entire document manually.

Printing a sending report
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 81). For an
explanation of the messages, see page 108.

Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 136. To print it automatically after every 30 new
fax transmissions and receptions, make sure feature

56

8. . Fax