Panasonic KX-PRL262 操作指南
– 4 –
Pairing a Bluetooth cellular phone
1
Handset:
For CELL 1: {MENU} (right soft key) (6241
For CELL 2: {MENU} (right soft key) (6242
L
For CELL 1: {MENU} (right soft key) (6241
For CELL 2: {MENU} (right soft key) (6242
L
After the corresponding CELL indicator on the base unit starts flashing, the rest of the
procedure must be completed within 5 minutes.
procedure must be completed within 5 minutes.
2
Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular
phone to enter the pairing mode.
L
While the corresponding CELL indicator is flashing, follow the instructions of your cellular
phone to enter the pairing mode.
L
Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default:
“0000”). If your cellular phone shows PassKey confirmation on its display, follow the
“0000”). If your cellular phone shows PassKey confirmation on its display, follow the
directions to proceed.
3
Handset:
Wait until a long beep sounds.
L
Wait until a long beep sounds.
L
It may take more than 10 seconds to complete pairing.
L
When the corresponding CELL indicator lights up, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
base unit. You are ready to make cellular calls.
4
{
OFF}
Note:
L
L
Make sure that your cellular phone is set to connect to this product automatically. Refer to your
cellular phone’s operating instructions.
cellular phone’s operating instructions.
Base unit: CELL indicators
Status
Meaning
On
A cellular phone is connected. Ready to make/receive cellular
calls.
calls.
Flashing
− The cellular line is in use.
− Phonebook entries are being copied from a cellular phone.
− The base unit is searching for the paired cellular phone.
− The base unit is pairing a cellular phone.
− A cellular call is put on hold.
Flashing rapidly
A cellular call is being received.
Light off
− A cellular phone is not paired to the base unit.
− A cellular phone is not connected to the base unit.
Handset: Link to cell display items
W
A cellular line is in use.
L
L
When flashing: The cellular call is put on hold.
L
When flashing rapidly: A cellular call is being received.
A cellular phone is connected.
Ready to make/receive cellular calls.
L
When turned off: A cellular phone is not connected to the base unit.
*1 Corresponding cellular line(s) is(are) indicated next to the item.
uv
− A cellular call is being done on that line.
− The cellular line is selected for the setting.
Link to cell
PRL262_PRD262_QG(en).fm Page 4 Tuesday, February 18, 2014 10:19 AM