Panasonic KXMB2178HK 操作指南

5. MCDN: Select the desired setting. A MOK/SETN

R To set other items, repeat steps 4 and 5.
R The dial keypad can be used for the setting, depending on the item.

6. Press Mw/STOPN repeatedly to exit.

Scanning/making copies using the pre-programmed setting
1. Set the unit to a desired mode (scan or copy).
2. M[/QUICK-JOBN
3. MCDN: Select the desired setting number (1-3).
4. Mx/STARTN

Note:
R You can print the QUICK-JOB list (page 95).

10.4 Cloud print (LAN supported models only) y

You can print contents from your smart phone, tablet device or computer etc, via Google Cloud Print

™

 service.

Important:
R This unit must be registered to Google Cloud Print

1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Network]
3. Type “root” as the user name, then enter the programming password (feature #155). A [OK]
4. Select [CLOUD] from the menu.
5. Click [Register] next to [REGISTRATION].
6. Check [I have agreed to "Terms and Conditions of Use".], and then click [Register].
7. Register to Google Cloud Print

™

.

R Google account information may be required for registration.

1. Open the document you want to print from the application supported Google Cloud Print™.
2. Start the printing procedure.

R This procedure varies depending on the application you are using. For details about how to perform the printing

procedure, refer to the documentation for your application.

3. Select the unit’s name as the active printer.

R Change the printer settings if necessary.

4. Complete the printing procedure.

R The document will be printed from the unit.

You can assign a password for printing from your computer. This feature enables you to control when the print starts
so that your confidential or sensitive documents will not be open for viewing or taken away.

Open the document you want to print.

Select [Print] from the menu.

Select the unit’s name as the active printer.

Click [Preferences], then click the [Job Type] tab.

Check [Secure Print].
R You can enter a desired job name in [Job Name], up to 15 characters. If not entered, the application itself will

assign the job a name.

Click [OK].

98