Panasonic KXTG2521FX 操作指南

下载
页码 44
Useful Information
35
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG2521
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor and turn off the handset, then reconnect the base unit’s 
AC adaptor and turn on the handset.
General use
Display message
Cause/solution
Error
L
Recording was too short. Try again.
Memory Full
L
The phonebook memory is full. Erase unnecessary 
entries (page 18).
L
Message memory is full. Erase unnecessary 
messages (page 27).
No link to base. 
Reconnect AC 
adaptor.
L
The handset has lost communication with the base 
unit. Move closer to the base unit and try again.
L
Unplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.
L
The handset’s registration may have been cancelled. 
Re-register the handset (page 40).
Problem
Cause/solution
The handset does not 
automatically turn on even after 
installing charged batteries.
L
Place the handset on the base unit or charger 
to turn on the handset.
The unit does not work.
L
Make sure the batteries are installed correctly 
(page 10).
L
Fully charge the batteries (page 10).
L
Check the connections (page 10).
L
Unplug the base unit’s AC adaptor to reset the 
unit and turn off the handset. Reconnect the 
adaptor, turn on the handset and try again.
L
The handset has not been registered to the 
base unit. Register the handset (page 40).
TG2511_21FX(e).book  Page 35  Tuesday, February 10, 2015  10:49 AM