Panasonic KXHNS107 操作指南
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
Green and yellow
Hub is starting up
Red
Alarm system is armed
Alarm system was triggered
Yellow
Initial setup required
Initial setup in progress, mobile device connected
Initial setup is starting
*1 You can configure the hub so that its LED indicator does not light in most states. See “General
Camera LED indicator
Off
No power, or LED indicator is turned off
Green
Normal operation
Registration mode
Red
Motion detected
Live images are being viewed or recorded
Camera is out of range of the hub, or device malfunction
Orange
Camera is not registered to a hub
*1 You can configure the camera so that its LED indicator does not light in most states. See “Device
*2 The LED indicator does not light when the indoor camera’s temperature sensor is triggered.
Motion sensor LED indicator
The LED indicator on the motion sensor does not light during normal operation. You can press
and
check the LED indicator to confirm the sensor’s status.
Off
No battery power
Green
No motion detected
Registration mode (you pressed and held
)
Red
Motion detected
Sensor is out of range of the hub, or is not registered to a hub
Note:
R After pressing
and confirming the sensor’s status, press
again to turn off the LED
indicator and conserve battery power.
47
Using the app