Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY 规格指南

AUX/
PWR

Green

Message:

%ENVMON-5-48V_STATUS: -48V supply OK

Explanation:

The –48 V power supply is operating normally.

Recommended action:

Message is informational only.

—

—

Message:

%ENVMON-5-RPS: Redundant power supply attached

Explanation:

Redundant power supply was connected to the router.

Recommended action:

Message is informational only.

The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.

—

—

Message:

%ENVMON-5-RPS: Redundant power supply removed

Explanation:

Redundant power supply was disconnected from the router.

Recommended action:

Message is informational only.

The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.

AUX/
PWR

Amber

Message:

%ENVMON-5-RPS_STATUS: RPS standby/faulty

Explanation:

Redundant power supply has failed or has gone into standby mode.

Recommended action:

Check the redundant power supply. If faulty, disconnect it from the router and contact your 
Cisco technical support representative.

The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.