Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY 规格指南
1-13
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6504-E Switch
Catalyst 6504-E Switch
The Catalyst 6504-E switch is a 4-slot horizontal chassis.
lists the features of the
lists the specifications of the Catalyst 6504-E switch chassis.
shows the front view and
shows the rear view of the Catalyst 6504-E switch.
Table 1-5
Catalyst 6504-E Switch Features
Feature
Description
Chassis
•
Four horizontal slots. Slots are numbered from 1 (top) to 4 (bottom).
Supervisor Engine
•
Supports Supervisor Engine 32 and Supervisor Engine 720.
–
Supervisor engines are installed in slot 1 and slot 2.
•
The uplink ports are fully functional on the redundant supervisor engine
in standby mode.
in standby mode.
Note
Redundant supervisor engines must be configured identically.
Modules
•
Supports up to three Catalyst 6500 series modules.
•
Does not support the WS-C6500-SFM and WS-X6500-SFM2 Switch
Fabric Modules.
Fabric Modules.
•
Some Catalyst 6500 series modules may:
–
Not be supported
–
Require that you install a Supervisor Engine 720
–
Have chassis slot restrictions
–
Require a specific software release level
Check your software release notes for specific information.
Backplane Bandwidth
•
32 GBps shared bus.
•
720 GBps switch fabric.
Clock and VTT module
•
One replaceable clock module (CLK-7600=) provides clocking signals
to the EOBC channel and the switching bus.
to the EOBC channel and the switching bus.
•
Non-replaceable voltage termination (VTT) module provides reference
voltage for bus signals.
voltage for bus signals.