Garmin Index™ Smart Scale 业主指南
NOTE: A USB ANT Stick
™
accessory (not included) is
required to set up the device using the Garmin Express
application.
3
Follow the on-screen instructions to set up and configure
your device.
NOTE: Until you complete the setup process, the device has
NOTE: Until you complete the setup process, the device has
limited functionality.
Adding Users
You can invite up to 15 users to use your Garmin Index device
using your Garmin Connect account. Each invited user must
have a Garmin Connect account.
Changing Users
Your device distinguishes between users automatically based
on weight and frequency of use. When you step on the device, it
weighs you and displays your initials on the screen. If the device
detects a similar user, you can change users.
Tap the device to move through the users registered to the
scale.
Changing Your Wi
‑Fi Connection
You can return your device to setup mode and change your
Wi
‑Fi connection at any time.
NOTE: Returning the device to setup mode does not delete any
user information from the device.
On the underside of the scale, press RESET.
The wireless indicator lights on the LCD screen flash to indicate
the device is ready to set up (
).
Reading and Recording
Measurements
Each time you step on the device, it calculates your weight and
other measurements. The LCD screen displays the calculated
measurements automatically, moving to the next measurement
every few seconds.
1
Stand on the scale.
TIP: For best results, stand with your feet placed flat on the
glass surface of the scale. Do not contact the screen or the
Garmin
®
logo.
The scale weighs you, and it displays your initials and
measurements automatically.
2
Tap the device to move through the measurements more
quickly.
If you have set up your device with an active Wi
‑Fi connection,
measurements are uploaded automatically to your Garmin
Connect account.
Measurements
The Garmin Index smart scale uses bioelectrical impedance to
calculate your body composition. The device sends a small
amount of electrical current (which you will not feel) from one
foot through your body to the other foot. The device measures
the electrical signal after it passes through your body to estimate
aspects of your body composition.
For best accuracy, ensure you use the device under the same
For best accuracy, ensure you use the device under the same
circumstances and at approximately the same time of day each
time you use the device. Activities that temporarily impact your
body's weight, hydration, and distribution of water can impact
the accuracy of measurements.
Garmin recommends waiting two hours before using the device
Garmin recommends waiting two hours before using the device
after eating, drinking, exercising, bathing, or visiting a sauna.
Body Mass Index (BMI): Body mass index is your weight in
Body Mass Index (BMI): Body mass index is your weight in
kilograms divided by your height in meters squared. BMI is
often used to estimate if a person is underweight or
overweight.
Muscle Mass: Muscle mass is the total amount of mass
attributed to muscle. It is measured in pounds, kilograms, or
stones and pounds.
Bone Mass: Bone mass is the total amount of mass attributed
to bone. It is measured in pounds, kilograms, or stones and
pounds.
Body Fat Percentage: Body fat percentage is the percentage of
total mass attributed to fat, including essential fat and storage
body fat. Essential body fat is required for basic health.
Water Percentage: Water percentage is the percentage of total
mass attributed to fluid. This measurement can be used to
indicate your level of hydration.
Device Information
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not store the device where prolonged exposure to extreme
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Do not use a sharp or abrasive object to clean the device.
Avoid chemical cleaners, abrasive cleaners, solvents, and insect
Do not use a sharp or abrasive object to clean the device.
Avoid chemical cleaners, abrasive cleaners, solvents, and insect
repellents that can damage plastic components and finishes.
Cleaning the Device
1
Clean the surface of the device using a cloth dampened with
a mild detergent solution.
2
Wipe the device dry.
Specifications
Maximum load
181.4 kg (400 lb.)
Battery type
4 AA batteries (alkaline, NiMH, lithium, or
precharged NiMH)
precharged NiMH)
NOTICE
You must use 1.5 V batteries in this device.
Battery life
Up to 9 mo.
Operating
temperature range
temperature range
From 10° to 40°C (from 50° to 104°F)
Radio frequency/
protocol
protocol
2.4 GHz 802.11 b/g/n Wi
‑Fi technology
2.4 GHz ANT wireless technology
2.4 GHz Bluetooth Smart wireless technology
2.4 GHz Bluetooth Smart wireless technology
2
Reading and Recording Measurements