Yamaha Pro Yamaha DGX-660B 业主指南
Keyboard Stand Assembly
DGX-660 Owner’s Manual
13
Set
ting Up
2
Attach the metal brackets.
Attach the metal brackets
w
to the top of the side
boards, using the screws
e
as shown.
3
Attach the stand bases.
Insert the joint connectors
q
into the side boards
as shown. The joint connectors have been installed
properly if you can see the screw head on the con-
nector.
properly if you can see the screw head on the con-
nector.
Attach the “L” (Left) and “R” (Right) stand bases
to the bottom of the side boards, using the screws
to the bottom of the side boards, using the screws
r
. “L” (Left) and “R” (Right) are marked on the
upper surfaces of the stand bases. If you have trou-
ble fastening the screws, use a screwdriver to
rotate the joint connectors so that the connector
holes are aligned with the screw holes on the stand
bases.
ble fastening the screws, use a screwdriver to
rotate the joint connectors so that the connector
holes are aligned with the screw holes on the stand
bases.
2
L
R
e
3 x 8 mm
roundhead
screws
roundhead
screws
w
Metal bracket
(C)
(C)
w
Metal bracket
(A)
(A)
w
Metal bracket
(B)
(B)
w
Metal bracket
(C)
(C)
e
3 x 8 mm
roundhead
screws
roundhead
screws
3
q
Joint
connectors
connectors
r
6 x 70 mm
roundhead screws
roundhead screws
“L”
“R”
• If you put the connectors in wrong direction and want to
take them out, tap around the holes on the boards.
NOTE