Canon Speedlite 430EX III-RT 业主指南
20
When you set the camera’s shooting mode to <V> (Program AE) or fully
automatic mode, you can shoot in E-TTL II/E-TTL fully automatic flash
mode.
automatic mode, you can shoot in E-TTL II/E-TTL fully automatic flash
mode.
1
Set the flash mode to <a>.
Press the <E> button of the
<S> cross keys.
<S> cross keys.
Turn <9> to select <Q>, then
press <8>.
press <8>.
2
Focus on the subject.
Press the shutter button halfway to
focus.
focus.
X
The shutter speed and aperture are
displayed in the viewfinder.
displayed in the viewfinder.
Check that <Q> is lit in the viewfinder.
3
Take the picture.
Check that the subject is in the
effective flash range.
effective flash range.
When you press the shutter button
completely, the flash will fire and the
picture will be taken.
completely, the flash will fire and the
picture will be taken.
a: Fully Automatic Flash Photography
Effective flash range
If the subject is dark (underexposed) when you check the shot image,
move closer to the subject and shoot again. You can also increase the
ISO speed when using a digital camera.
move closer to the subject and shoot again. You can also increase the
ISO speed when using a digital camera.
“Fully automatic mode” refers to <A>, <1>, and <C> shooting
modes.
modes.
Even when attached to a camera that supports the E-TTL II autoflash
system, <a> is displayed on the LCD panel.
system, <a> is displayed on the LCD panel.