Revel Concerta2 F36 业主指南

5

Loudspeaker fidelity depends on the following three factors: loudspeaker 
accuracy, loudspeaker placement and listening room acoustics. 
Advanced Revel design features allow the Concerta2 to achieve 
exceptional acoustical precision. As a result, experimenting with 
loudspeaker placement and listening room acoustics will have the most 
significant impact on the loudspeakers’ performance. 

•  Remove all obstructions between the loudspeaker and the 

primary listening position. For instance, a coffee table between 
the loudspeaker and the primary listening position will create 
reflections that will degrade stereo imaging and timbre. Placing 
the loudspeakers near large objects may also cause unwanted 
reflections.

•  For the best stereo imaging, place the loudspeakers so that they are 

both the same distance from the primary listening position and so 
they are both the same distance from the side walls, as shown in the 
illustration.

Front Wall

Equal 

Distances

Equal 

Distances

Primary Listening Position

Right 
F36/F35/M16

Left 

F36/F35/M16

 

•  For optimal stereo imaging and timbre, aim the loudspeakers directly 

toward the primary listening position as shown in the illustration 
above. If you wish to widen the stereo soundstage you can reduce 
this toe-in angle, even to the point at which the loudspeakers are 
pointing straight forward.

•  Moving the loudspeakers farther from the front and side listening 

room walls will improve stereo imaging and the sense of 
spaciousness in the listening space.

•  Moving the loudspeakers closer to the corners or walls of the 

listening room will increase bass level.

Optional Concerta2 stands are available for the C25 and M16 that place 
the loudspeakers at the proper height for installation below a TV display. 
Refer to the assembly instructions that are included with the stands for 
additional information.

 

When flush-mounting the C25 or M16 inside of a cabinet or 
entertainment center:

•  Make sure that the front of the loudspeaker is flush with the front 

edge of the mounting shelf and surrounding surfaces.

•  If necessary to aim the center channel directly at the listeners’ ears, 

use the supplied feet to angle the loudspeaker at the listeners’ ears, 
see the next page for additional information.