Revel Concerta2 F36 业主指南

6

C25 loudspeakers include two sets of adjustable feet, one short and 
one long that let you angle the loudspeaker up or down so it is aiming 
towards listeners’ ears when it is installed above or below a TV display. 
The feet screw into the threaded inserts on the bottom of the speaker.

•  To tilt the loudspeaker upward, install the set of short feet into the 

front threaded inserts on the bottom of the loudspeaker. Install the 
long feet on the back so that the loudspeaker achieves a level balance. 

Rear 

Inserts

Front 

Inserts

•  To aim the loudspeaker straight forward (with no tilt), install the set 

of short feet into the front threaded inserts on the bottom of the 
loudspeaker and the long threaded feet on the back inserts. Adjust 
the feet so that the loudspeaker achieves a level balance.

•  To tilt the loudspeaker downward, install the set of long feet into the 

rear threaded inserts on the bottom of the loudspeaker. Adjust the 
feet so that the loudspeaker achieves a level balance.

Upward Tilt

Short Feet in  
Front Inserts

No Tilt

Short Feet in  
Front Inserts

Long Feet in 
Rear Inserts

Downward Tilt

Long Feet in 
Rear Inserts

Four adjustable spikes are included for each F35 and F36 loudspeakers. 
You can install these spikes in the bottoms of the loudspeaker cabinets 
to provide optimal stability, accommodating installations on tile, 
hardwood, and carpeted floors.

To install and adjust the spikes:

1.  Place the loudspeaker on its side on a soft towel or carpeted floor.

2.  Screw the spikes into the fittings on the bottom of the loudspeaker. 

The spikes can be installed with either the pointed end or round end 
protruding from the cabinet.

•  If the loudspeakers are to be placed on a carpeted floor, install the 

spikes with the pointed ends protruding from the cabinet.

•  If the loudspeakers are to be placed on wood, linoleum or tile floor, 

install the spikes with the round ends protruding from the cabinet. 
After determining the final locations for the speakers you can place 
coins under the spikes to protect the floor surface from damage.

Pointed 
End Out

•  If you wish you can install the spikes with the pointed ends 

protruding from the cabinet for placement on wood, linoleum or tile 
floors. In this case you must place coins or similar items under the 
spikes to avoid damaging the floor surface.