MartinLogan Motion® 35XT 业主指南
9
S
PECIFICATIONS
*
Frequency Response . . . . . . . . . . . . . . . . . . . . .
Dispersion . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency. . . . . . . . . . . . . . . . . . . . .
High Frequency Driver . . . . . . . . . . . . . . . . . . .
Low Frequency Drivers . . . . . . . . . . . . . . . . . . .
Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Amplifier Power. . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . . . . . . . . .
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . .
50–25,000 Hz ± 3 dB
80° x 30°
92 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
amplifiers.
2,200 Hz
1.2” x 2.4” (3.2cm x 6.1cm) Folded Motion
Transducer with 4.5” x 2.75” (11.4cm x 7cm)
diaphragm.
Transducer with 4.5” x 2.75” (11.4cm x 7cm)
diaphragm.
6.5” (16.5cm) aluminum cone with cast polymer
basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce cone
break-up modes.
basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce cone
break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Tweeter thermal/current protection.
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Tweeter thermal/current protection.
20–250 watts
Custom 5-way tool-less binding posts
18.5 lbs. (8.4 kg)
13.5” x 7.6” x 11.8”
(34.3cm x 19.2cm x 30cm)
(34.3cm x 19.2cm x 30cm)
*Specifications are subject to change without notice.