Andrew Wireless System ML717P 用户手册

 

 
  Check the suitability of the wall-mounting kit and the wall. 
  Mark the position of the drilling holes (for measurements and a more detailed 

description refer to the wall mounting plan that is part of the delivery).  

  Drill four holes at the marked positions and insert dowels*. 
  Screw the mounting brackets to the wall / dowels using the four dowel screws as 

illustrated in figure 3-1 Mounting bracket installation. 

  For each bracket, first screw in the 2 washers, then the 2 spring washers, then 

  Hang the Remote Unit into the upper mounting bracket at a slight angle and let it 

move smoothly towards the wall so that it engages firmly into the brackets (see 
figure 3-2 RU mounting). Then, screw the Remote Unit to the lower mounting 
bracket using 2 of the M8x25 screws that are part of the delivery (4 are provided). 

  Ensure that there is free access to the electrical connections as well as to the 

cabinet. The approved bending radius of the connected cables must not be 
exceeded. 

 

 

 

 

 

 

Upper 

mounting 

bracket 

Page 17 

MF0143AUB.doc

 

 

* The dowels are not part of the delivery since the suitable type depends on the on-site conditions 

(material of wall). Therefore, use dowels that are appropriate for the mounting surface. 

M8 screws 

Spring washer

Washer

Position of 

dowels * 

Lower 

mounting 

bracket