ruwido austria GmbH 759A 用户手册
copyright 2017 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
Telus_hospitality BLE_2759-515_remote_control_user_guide_v2
page 12 of 14
remote use the STB/RSTEP protocol
2.5
switching between layers BLE2IR dongle
1. press options button for a minimum of 3 seconds, LED flashes twice green
2. enter the code 0 9 0 5 – LED flashes twice green
2. enter the code 0 9 0 5 – LED flashes twice green
BLE2IR dongle will use RCMM - DEFAULT
3. enter the code 0 9 0 4 – LED flashes twice green
BLE2IR dongle will use RSTEP
2.6
querying the stored 2-digit DB version
1. press options button for a minimum of 3 seconds, LED flashes twice green
2. enter the code 9 0 0 1 LED flashes twice green
3. to query the currently saved code, press 1 for first digit(year) and 2 for second
2. enter the code 9 0 0 1 LED flashes twice green
3. to query the currently saved code, press 1 for first digit(year) and 2 for second
digit(month)
if no key is pressed for 10 seconds, while in “Programming mode”, the remote will return
automatically to its previous state after signalising error (LED 2 sec. lighting).
automatically to its previous state after signalising error (LED 2 sec. lighting).
2.7
code search- 5 steps back
if code search [0029 / 0079 – Others] has been started and the correct code has been
missed e-g. power button has not been released and confirmed with OK button - it is
possible to go up to 5 steps back in the code list.
missed e-g. power button has not been released and confirmed with OK button - it is
possible to go up to 5 steps back in the code list.
1. press rewind button for one step back; up to 5 times to go back up to 5 codes
2. if rewind button is pressed 6 times it will go back to the 1st code of the “last 5 list”
3. now you can test all device functions within a timeout of 10s.
4. if no button is pressed, code search will be exited after time out (10s).
5. note that the code will not be stored
6. to continue with code search press forward button once; then press the power
2. if rewind button is pressed 6 times it will go back to the 1st code of the “last 5 list”
3. now you can test all device functions within a timeout of 10s.
4. if no button is pressed, code search will be exited after time out (10s).
5. note that the code will not be stored
6. to continue with code search press forward button once; then press the power
button to continue with normal code search as described above
7. to confirm a working code press OK button otherwise code will not be stored after
timeout
8. pressing back/exit button will exit programming mode without storing programming