ruwido austria GmbH 759A 用户手册
copyright 2017 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
Telus_hospitality BLE_2759-515_remote_control_user_guide_v2
page 11 of 14
2
technician installation guide
2.1
querying the stored 4-digit TV code
1. press options button for a minimum of 3 seconds, LED flashes twice green
2. enter the code 1 0 0 2 – LED flashes twice red
3. to query the currently saved code, press 1 for first digit, 2 for second digit, 3 for third
2. enter the code 1 0 0 2 – LED flashes twice red
3. to query the currently saved code, press 1 for first digit, 2 for second digit, 3 for third
digit and 4 for fourth digit
2.2
querying the stored 4-digit amplifier code
1. press options button for a minimum of 3 seconds, green LED flashes twice
2. enter the code 7 0 0 2 - LED flashes twice yellow
3. to query the currently saved code, press 1 for first digit, 2 for second digit, 3 for third
2. enter the code 7 0 0 2 - LED flashes twice yellow
3. to query the currently saved code, press 1 for first digit, 2 for second digit, 3 for third
digit and 4 for fourth digit
2.3
reset
1. press options button for a minimum of 3 seconds, LED flashes twice green
2. enter the code 9 9 9 9 – LED flashes twice green
2. enter the code 9 9 9 9 – LED flashes twice green
factory reset has been completed; remote is set back to original factory settings
3. enter the code 1 0 9 9 – LED flashes twice red
TV programming will be deleted; AMP (if programmed) will remain
4. enter the code 7 0 9 9 – yellow LED flashes twice
AMP programming will be deleted; TV (if programmed) will remain
2.4
switching between layers RCU
1. press options button for a minimum of 3 seconds, LED flashes twice green
2. enter the code 0 0 0 1 – LED flashes twice green
2. enter the code 0 0 0 1 – LED flashes twice green
remote use the BLE mode(rcmm for pairing) DEFAULT
3. enter the code 0 0 0 4 – LED flashes twice green
remote use the STB/RCMM protocol (fallback if BLE not working)
4. enter the code 0 0 0 5 – LED flashes twice green