ruwido austria GmbH 759A 用户手册
copyright 2017 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
Telus_hospitality BLE_2759-515_remote_control_user_guide_v2
page 6 of 14
1
user installation and programming guide
1.1
dongle and RCU pairing
1. press “play/pause” and “on demand” keys simultaneously for 3 seconds
the LED will start flashing red continuously
2. plug in the ble2ir dongle (fig. 2: BLE2IR dongle) to an available USB port of your
Optik TV Set Top Box (fig. 3: Optik TV STB)
3. once paired, the red LED on the remote control will stop flashing
the remote control is now using the green LED for button presses
in case pairing failed, the remote control is still using the red Optik TV
LED for button presses. in this case the above procedure should be
repeated
LED for button presses. in this case the above procedure should be
repeated
fig. 2: BLE2IR dongle
fig. 3: Optik TV STB
please note if the BLE2IR dongle is not being used / plugged in
the remote control cannot be programmed for TV or amplifier.
the remote control cannot be programmed for TV or amplifier.
however the remote control will continue in IR mode to operator the
STB.
STB.
fig. 1: hospitality BLE
RCU