ruwido austria GmbH 759A 用户手册
copyright 2017 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
Telus_hospitality BLE_2759-515_remote_control_user_guide_v2
page 9 of 14
1.4
direct code programming TV and amplifier
1. press and hold options key for 3 seconds, until the LED flashes twice green
2. enter the 4-digit code from the code list
2. enter the 4-digit code from the code list
the LED flashes twice green
3. press the tv power/vol+/vol-/mute key to verify the functionality of this code
in case an invalid code has been entered the red LED will be on for 2 seconds.
if no key code is being entered within 10 seconds the remote will time out and the
programming procedure needs to be started again.
programming procedure needs to be started again.
1.5
power control STB, TV and amplifier
1.5.1 no devices programmed
power button only power toggles STB
1.5.2
TV programmed
power button power toggles STB (BLE) and TV (IR)
Volume + / - mute are controlled via TV
Volume + / - mute are controlled via TV
1.5.3
AMP programmed
power button power toggles STB (BLE) and AMP (IR)
Volume + / - mute are controlled via AMP
Volume + / - mute are controlled via AMP
1.5.4
AMP + TV programmed
power button power toggles STB (BLE), TV (IR) and AMP (IR)
Volume + / - mute are controlled via AMP
Volume + / - mute are controlled via AMP
1.6
factory reset
1. press and hold options key for 3 seconds, until the LED flashes twice green
2. enter code 9 9 9 9 – LED flashes twice green
2. enter code 9 9 9 9 – LED flashes twice green
reset has been completed; remote is set back to original factory settings
factory default setting
no TV or Amplifier programmed