Recon Dynamics LLC B0-0003 用户手册
PROXBOX INSTALLATION GUIDE
© 2018 Recon Dynamics, LLC | v1.2
5
Ensure when routing the antenna cable that it is well protected, so nothing can
damage it once installed.
damage it once installed.
• Connect cable to ProxBox and hand tighten. Refer to Figure 2 for ProxBox port
identity.
• Wrap connector with enough coax seal tape to completely cover the connection then
mold around cable and connector to weatherize connection. Inspect to ensure
connection is fully covered.
connection is fully covered.
F
INAL
P
OWER
U
P
• Re-inspect all cable routing and connections to ensure completion. Re-inspect
battery connection for proper polarity.
• Measure voltage at the power connector to verify 12 volts will be supplied to the
ProxBox.
• Connect the power connector to the ProxBox and hand tighten. Once the power cord
is fit over the power connector a final ¼ turn is required to secure the power
connection. Refer to Figure 2 for ProxBox port identity.
connection. Refer to Figure 2 for ProxBox port identity.