Zonoff Inc. EMBY001 用户手册

2.  Click on the “+” button next to a device’s icon to add that device to the Scene. Once successfully added, the icon will 

highlight. To remove a device, click its “-“ button. Once successfully removed, the icon will turn gray.

3.  Click on a highlighted device icon to choose the device’s settings for this Scene. In the device control window that appears, 

you can configure each device’s settings using the available buttons and sliders.

NOTE: When configuring device settings for Somfy RTS motorized products, the MY Position is applied to additional Scenes
created in the Scene Configurator. Please refer to page 17 to learn more about creating Scenes in the Scene Configurator
and applying the MY Position.

Programming Instructions 

cont’d

4.  When finished, click the “X” in the upper right hand corner of the window. Your changes will automatically be saved.

5.  Continue to choose settings for all the devices you wish to include in the Scene. Once finished, click the CLOSE button to

save and exit that Scene.

6.  To rename a Scene, click on the existing Scene name (i.e. Scene Controller Button #1). The Scene Editor window will 

appear and you can now rename the Scene. 

7.  Activate a Scene by clicking the Scene’s “play” button. The word “Activated” will briefly appear then disappear,

confirming proper activation. If you have configured a Scene that was created in the Device Configurator, press the
appropriate button on the scene controller to activate that Scene.

If you would like to add a Somfy RTS motorized product’s MY position to a Scene, you can do so to Scenes created in the Scene 
Configurator. Scenes created in the Scene Configurator can also be applied to motion sensors.

1.  In the Scene Configurator, press the “+” button in the upper right hand corner to create a new Scene.

2.  In the Scene Editor window that appears, name the new Scene.

Programming Instructions 

cont’d