Mine Safety Appliances Company 10063188 用户手册

SCBA monitoring, an entry of “Truck_1_/2” (where _
represents a space) will display as “Truck 1” and the
position number will be hidden.    

3.   Insert an ID tag into the open slot on the front of the

ICM Tag Writer.  

4.  Click the “Write” button.
5.  A small dialog box will appear to confirm that the data

was programmed successfully.  

Note:  The Team/Position ID will remain in the ICM TxR
Unit until a new Team/Position ID has been entered.  

Programming Base Station ID Tags
1.  Click the circle next to “Special”
2.  Click the circle next to “Base station”.
3.  Locate the serial number for the base station to be

associated with this ID Tag.  The serial number is the
eight (8) digit number located on the bottom of the
base station.  The base station serial number is also
displayed at the top of the SCBA monitoring window
of the MSA ICM TxR Accountability Software.    

4.  Type the base station serial number in the white text-

entry box. 

5.  Insert an ID tag into the open slot on the front of the

ICM Tag Writer.  

6.  Click the “Write” button.
7.  A small dialog box should appear to confirm that the

data was programmed successfully.  

Note: The base station ID will remain in the ICM TxR Unit
until a new base station ID has been entered. 

Note:  To remove a base station preference from an ICM
TxR Unit, a base station ID Tag containing “00000000” (8
zeros) must be created and scanned into the ICM TxR
Unit. 

For additional information, refer to the ICM TxR Unit and
NightFighter Heads-Up Display System operation and
maintenance instructions (P/N 10068930). 

20

TAL 605 (L) Rev. 0 - 10068929