Mine Safety Appliances Company 10063188 用户手册
MAINTENANCE
CARING FOR THE BASE STATION
Cleaning
The base station may be cleaned by wiping surfaces with
a damp cloth with mild soap and water. MSA Confidence
Plus
The base station may be cleaned by wiping surfaces with
a damp cloth with mild soap and water. MSA Confidence
Plus
®
Cleaning Solution may be used for cleaning the
base station but is not necessary.
The base station is not waterproof. Do not submerge
in water.
in water.
Storage
The base station should be stored in a dry place, prefer-
ably inside of a vehicle.
The base station should be stored in a dry place, prefer-
ably inside of a vehicle.
The base station is not waterproof. Do not mount
base station to exterior of vehicle.
base station to exterior of vehicle.
When the base station is not monitoring SCBA, close the
SCBA Monitoring window of the ICM TxR Accountability
Software. The ICM TxR Accountability Software program
may remain open while in storage but MSA recommends
closing the SCBA monitoring portion of the program while
in storage. Doing so will stop the base station from moni-
toring and will reduce the current consumption and elimi-
nate unnecessary drain on the vehicle’s battery. The PC-
Link light on the base station will be RED when the SCBA
monitoring window has been closed.
SCBA Monitoring window of the ICM TxR Accountability
Software. The ICM TxR Accountability Software program
may remain open while in storage but MSA recommends
closing the SCBA monitoring portion of the program while
in storage. Doing so will stop the base station from moni-
toring and will reduce the current consumption and elimi-
nate unnecessary drain on the vehicle’s battery. The PC-
Link light on the base station will be RED when the SCBA
monitoring window has been closed.
To decrease the start up time for the ICM TxR
Accountability Software when arriving at an incident, store
the PC and base station in a vehicle with power supply,
antenna, and USB connections in place. Once the ICM
TxR Accountability Software has been started, this pro-
gram can remain open while in storage so that when arriv-
ing on the scene of an incident, only the SCBA monitoring
window needs to be opened to begin monitoring SCBA.
Accountability Software when arriving at an incident, store
the PC and base station in a vehicle with power supply,
antenna, and USB connections in place. Once the ICM
TxR Accountability Software has been started, this pro-
gram can remain open while in storage so that when arriv-
ing on the scene of an incident, only the SCBA monitoring
window needs to be opened to begin monitoring SCBA.
Failure to close the SCBA monitoring window when
the ICM TxR Accountability Software is not in use
could cause unnecessary battery drain on the vehicle.
the ICM TxR Accountability Software is not in use
could cause unnecessary battery drain on the vehicle.
Service
The base station must not be opened. There are no cus-
tomer serviceable parts inside. DO NOT open the large
black plugs on located on both sides of the base station.
The base station must not be opened. There are no cus-
tomer serviceable parts inside. DO NOT open the large
black plugs on located on both sides of the base station.
The base station does not contain batteries.
In the event that the label displaying the base station seri-
al number becomes illegible, this serial number can be
found by connecting the base station to the PC and
opening the SCBA monitoring window. The base station
ID will be displayed in the upper left portion of the SCBA
monitoring window. This serial number is needed to
assign a preferred base station to an ICM TxR Unit. Refer
to the ID Tag Writer Function section of this manual for
instructions on using base station ID Tags.
al number becomes illegible, this serial number can be
found by connecting the base station to the PC and
opening the SCBA monitoring window. The base station
ID will be displayed in the upper left portion of the SCBA
monitoring window. This serial number is needed to
assign a preferred base station to an ICM TxR Unit. Refer
to the ID Tag Writer Function section of this manual for
instructions on using base station ID Tags.
21
TAL 605 (L) Rev. 0 - 10068929