K-jump Health Co. Ltd. TEMPONITOR 用户手册
4
5
6
7
Setting the Device
sensor
Adhesive tape
About the sensor
The sensors is constructed by two parts:
transmitter and temperature sensor. The
transmitter is used for inducing power as
well as data transmission; the temperature
sensor is used for body temperature
detecting.
The sensors is constructed by two parts:
transmitter and temperature sensor. The
transmitter is used for inducing power as
well as data transmission; the temperature
sensor is used for body temperature
detecting.
Applying the Sensor
For fixing the sensor, a dressing (or surgical)
adhesive tape will be needed. A high quality
tape without side-effect is recommended
since long period (usually 24~48 hr)
adhesion.
1. Apply the sensor to ear canal, armpit or
For fixing the sensor, a dressing (or surgical)
adhesive tape will be needed. A high quality
tape without side-effect is recommended
since long period (usually 24~48 hr)
adhesion.
1. Apply the sensor to ear canal, armpit or
abdominal area below navel(depended
on different types).
on different types).
2. For armpit and body skin, fixing the
sensor by medical adhesive tape(s). Be
sure the firmness.
sure the firmness.
3. Subject is allowed to dress cloth rather
than naked.
4. For infant or baby, the patch under diaper
will benefit the measurement result since
warmer measurement environment.
warmer measurement environment.
sensor
Adhesive
tape
Preparation before Measurement
Period for Heat Equilibrium
After applying the sensor, a 5~10 minutes
waiting for temperature equilibrium
between the sensor and your skin surface
will be necessary before taking the first
measurement.
waiting for temperature equilibrium
between the sensor and your skin surface
will be necessary before taking the first
measurement.
Room
temperature
temperature
Skin surface
temperature
temperature
5~10 min.
Start data reading
Setting °C or °F
The KD 2101 provides user to select the unit
in either °C or °F by following steps:
1. Click the "O/I" key to turn on the device.
2. The LCD will show all
The KD 2101 provides user to select the unit
in either °C or °F by following steps:
1. Click the "O/I" key to turn on the device.
2. The LCD will show all
segments first and
enter to default unit
mode; now, you have
5-second period for
the setting; keep
pressing the O/I key
and the unit will
switch to either °C or
°F you want.
enter to default unit
mode; now, you have
5-second period for
the setting; keep
pressing the O/I key
and the unit will
switch to either °C or
°F you want.
Setting Date and Time
After installation/replacement of the
batteries, the date and time are re-freshed
to default value; a setting is necessary by
following steps:
1. Under power-off mode,
After installation/replacement of the
batteries, the date and time are re-freshed
to default value; a setting is necessary by
following steps:
1. Under power-off mode,
keep pressing the "M"
key until it shows a
flashing "2003" which is
the setting mode of year.
key until it shows a
flashing "2003" which is
the setting mode of year.
2. Every clicking of the "M"
key to enter the next
mode said month
date
hour
minute to the
end.
3. Every clicking of the of
"O/I" key will add one to
the value for your setting.
the value for your setting.
4. After the setting, the
device is always back to
"power-off" mode.
"power-off" mode.
M key
DATE
(M/D)
DATE
(M/D)
TIME
TIME
O/I key
(+ 1)
O/I key
(+ 1)
(Keep pressing
O/I key for 2 sec)
O/I key for 2 sec)
TIME
TIME
Important Information
Start Measurement
Room Temperature Affects Skin
Temperature
Temperature
Skin is major organ for maintenance of body
temperature; either hot or cold environment
will cause skin temperature to rise or to fall.
It is recommended that subject is kept in a
comfortable room temperature (usually
22~28°C (71.6~82.4 °F) for taking the
measurement.
temperature; either hot or cold environment
will cause skin temperature to rise or to fall.
It is recommended that subject is kept in a
comfortable room temperature (usually
22~28°C (71.6~82.4 °F) for taking the
measurement.
Notice
When using the skin sensor or armpit
sensor, wipe body skin with a dry towel .
sensor, wipe body skin with a dry towel .
1. Turn on the device, the device will
perform system checking automatically
until "ready for detecting" as figure:
until "ready for detecting" as figure:
2. Place the reader on the upright direction
of the transmitter around 3~4 cm (1,5
inches) distance.
inches) distance.
3. Click the "start key", the device starts
scanning the patch temperature with
flashing "---".
flashing "---".
4. The result is then shown on the LCD with
2 beep sounds. Measurement is
completed.
completed.
5. For another reading, just repeat the steps
mentioned above.
with
in
3 cm
(1.5
inch)
TIME
TIME
TIME
TIME
TIME
TIME
Start
key
key
Insert the ear
tape patch
into ear
canal.