K-jump Health Co. Ltd. TEMPONITOR Manual Do Utilizador

4

5

6

7

About the sensor
The sensors is constructed  by two parts: 
transmitter and temperature sensor.  The
transmitter is used for inducing power as 
well as data transmission; the temperature
sensor is used for body temperature
detecting.

Applying the Sensor
For fixing the sensor, a dressing (or surgical)
adhesive tape will be needed. A high quality 
tape without side-effect is recommended 
since long period (usually 24~48 hr)
adhesion.
1. Apply the sensor to ear canal, armpit or 

abdominal area below navel(depended 
on different types).

2. For armpit and body skin, fixing the 

sensor by medical adhesive tape(s).  Be
sure the firmness.

3. Subject is allowed to dress cloth rather 

than naked.

4. For infant or baby, the patch under diaper 

will benefit the measurement result since
warmer measurement environment.

After applying  the sensor, a 5~10 minutes 
waiting for temperature equilibrium 
between the sensor and your skin surface 
will be necessary before taking the first 
measurement.

Setting °C or °F
The KD 2101 provides user to select the unit
in either °C or °F by following steps:
1. Click the "O/I" key to turn on the device. 
2. The LCD will show all 

segments first and
enter to default unit 
mode; now, you have 
5-second period for
the setting; keep
pressing the O/I key 
and the unit will 
switch to either °C or 
°F you want.

Setting Date and Time 
After installation/replacement of the 
batteries, the date and time are re-freshed 
to default value; a setting is necessary by 
following steps:
1. Under power-off mode, 

keep pressing the "M" 
key until it shows a 
flashing "2003" which is 
the setting mode of year.

2. Every clicking of the "M"

key to enter the next 

mode said month

  date 

 hour 

 minute to the

end.

3. Every clicking of the of

"O/I" key will add one to
the value for your setting. 

4. After the setting, the

device is always back to 
"power-off" mode.

DATE

(M/D)

DATE

(M/D)

TIME

TIME

TIME

TIME

Skin is major organ for maintenance of body 
temperature; either hot or cold environment
will cause skin temperature to rise or to fall.
It is recommended that subject is kept in a
comfortable room temperature (usually 
22~28°C (71.6~82.4 °F) for taking the
measurement.

When using the skin sensor or armpit 
sensor, wipe body skin with a dry towel . 

1. Turn on the device, the device will

perform system checking automatically 
until "ready for detecting" as figure:

2. Place the reader on the upright  direction 

of the transmitter around  3~4 cm (1,5 
inches) distance.

3. Click the "start key", the device starts 

scanning the patch temperature with 
flashing "---".

4. The result is then shown on the LCD with 

2 beep sounds.  Measurement is 
completed.

5. For another reading, just repeat the steps 

mentioned above.

TIME

TIME

TIME

TIME

TIME

TIME