Racom RIPEX-154 用户手册
Notice, that the Log start, Last upd. and Log uptime labels at the top change to Diff. start, Diff. upd.
and Diff. uptime when the Difference log is displayed. They show the respective values for Difference
log.
and Diff. uptime when the Difference log is displayed. They show the respective values for Difference
log.
•
History
There is a possibility to display history logs using standard buttons. They are placed on the left side
of the button bar. The Refresh button displays the latest log values.
There is a possibility to display history logs using standard buttons. They are placed on the left side
of the button bar. The Refresh button displays the latest log values.
Top bar
•
Date Information about the actual date and time in the RipEX. It can be set in Settings/Device/Time
menu.
menu.
•
Log start
Date and time when the log has been cleared and started.
The log is cleared and started when Log save period expires or when Save buton is pressed or
when power is switched On.
Date and time when the log has been cleared and started.
The log is cleared and started when Log save period expires or when Save buton is pressed or
when power is switched On.
•
Last update
Date and time when log has been displayed. For actual values click the Refresh button.
Date and time when log has been displayed. For actual values click the Refresh button.
•
Log uptime
The difference between Log start and Last update.
The difference between Log start and Last update.
•
Log Save period
It redirects to Settings/Device/Neighbours&Statistics where Statistic&Neighbours log save period
can be set.
Also the Watched values broadcasting period can be set there. This is a period in which RipEX
periodically broadcasts its Watched values to neighbouring units, where they are saved and can
be displayed in the Neighbours table.
It redirects to Settings/Device/Neighbours&Statistics where Statistic&Neighbours log save period
can be set.
Also the Watched values broadcasting period can be set there. This is a period in which RipEX
periodically broadcasts its Watched values to neighbouring units, where they are saved and can
be displayed in the Neighbours table.
Neighbours
Neighbours log provides information about neighbouring units (Neighbour = RipEX, which can be ac-
cessed directly over the radio channel, i.e. without a repeater).
Protocol on Radio channel uses MAC addresses. A unit can learn the IP address of its neighbour only
when it receives its broadcast of Watched values (it contains both MAC and IP addresses). Thus when
Watched values broadcasting is Off in a Neighbour (Settings/Device/Neighbours&Statistics), there is
MAC address on the respective line in the Neighbours table. When a known IP adress of a Neighbour
changes, the unit cumulates data to the old IP address till it receives the next Watched values broadcast.
Maximum number of Neighbours listed in the table is 100. If this number is exceeded, the least signi-
ficant Neighbour is omitted. The first criterion is whether this RipEX communicates with the Neighbour
and the second criterion is the RSS level.
cessed directly over the radio channel, i.e. without a repeater).
Protocol on Radio channel uses MAC addresses. A unit can learn the IP address of its neighbour only
when it receives its broadcast of Watched values (it contains both MAC and IP addresses). Thus when
Watched values broadcasting is Off in a Neighbour (Settings/Device/Neighbours&Statistics), there is
MAC address on the respective line in the Neighbours table. When a known IP adress of a Neighbour
changes, the unit cumulates data to the old IP address till it receives the next Watched values broadcast.
Maximum number of Neighbours listed in the table is 100. If this number is exceeded, the least signi-
ficant Neighbour is omitted. The first criterion is whether this RipEX communicates with the Neighbour
and the second criterion is the RSS level.
Neighbours Table
Generally:
•
there are balloon tips with on line help for column names
•
the table can be sorted (descending/ascending) by any column, by clicking the column name
•
two values are displayed for each item: Last and Average. Last is the last value received, the Average
is a running average over all values received since the start of the log. The values received more
recently weigh up to 50% more in the average than the earlier ones.
is a running average over all values received since the start of the log. The values received more
recently weigh up to 50% more in the average than the earlier ones.
•
if a value in the table is underlined, it is a link to Graphs
•
green background indicates, that the item is monitored for alarm and its average value is within the
“normal” range (Settings/Device/Alarm management)
“normal” range (Settings/Device/Alarm management)
107
© RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration