Racom RIPEX-154 用户手册
When On, RipEX remains on for the set seconds from the moment of its wake-up.
○ Timeout from wake-up [sec.]
Default = 300 [240 - 64 800]
RipEX stays on for the set time from the moment of its wake-up.
RipEX stays on for the set time from the moment of its wake-up.
○ Reset timeout on received packets
List box: On, Off
Default = Off
If On, the Timeout from wake-up is reset with each packet received
Default = Off
If On, the Timeout from wake-up is reset with each packet received
•
Sleep Mode
Sleep Mode is controlled via the digital input on Power and Control connector. When the respective
pin is grounded, RipEX goes to sleep and consumes only 0.1 W at 13.8 V (see Section 4.4,
“Technical specification”). The time needed for complete wake-up is approx. 25 seconds (booting
time).
○ Timeout from sleep request [sec.]
Sleep Mode is controlled via the digital input on Power and Control connector. When the respective
pin is grounded, RipEX goes to sleep and consumes only 0.1 W at 13.8 V (see Section 4.4,
“Technical specification”). The time needed for complete wake-up is approx. 25 seconds (booting
time).
○ Timeout from sleep request [sec.]
Default = 300 [0 - 64 800]
RipEX remains on for the set time from the moment when the sleep input pin has been grounded.
RipEX remains on for the set time from the moment when the sleep input pin has been grounded.
Neighbours&Statistics
•
Parameters
List box: Default, Manual,
Default = Default
Default – Default (recommended) values are set and can not be edited.
Manual – Values can be set manually.
There are 2 tables with diagnostic information in the main menu - Diagnostic/Neighbours, Diagnost-
ic/Statistic. The Neighbours table displays Watched values from RipEX and from all its neighbours.
(Neighbour = RipEX, which can be accessed directly over the radio channel, i.e. without a repeater).
There is statistic information about the traffic volume in the Statistic table.
○ Watched values broadcasting period [min]
Default = Default
Default – Default (recommended) values are set and can not be edited.
Manual – Values can be set manually.
There are 2 tables with diagnostic information in the main menu - Diagnostic/Neighbours, Diagnost-
ic/Statistic. The Neighbours table displays Watched values from RipEX and from all its neighbours.
(Neighbour = RipEX, which can be accessed directly over the radio channel, i.e. without a repeater).
There is statistic information about the traffic volume in the Statistic table.
○ Watched values broadcasting period [min]
Default = 10 min, [0 = Off]
RipEX periodically broadcasts its Watched values to neighbouring units. The Watched values
can be displayed in Graphs and Neighbours menu.
Note: When Bridge mode is used, watched values broadcasting creates collisions for user traffic.
Be careful in using this feature.
RipEX periodically broadcasts its Watched values to neighbouring units. The Watched values
can be displayed in Graphs and Neighbours menu.
Note: When Bridge mode is used, watched values broadcasting creates collisions for user traffic.
Be careful in using this feature.
○ Neighbours&Statistic log save period [min]
Default = 1440 min (1 day) [10 - 7200 min]
This is the period, in which Neighbours and Statistics logs are saved in the archive and cleared
and new logs start from the beginning.
Note: The history files are organized in a ring buffer. Whenever a new file is opened, the numbers
of files are shifted, i.e. 0->1, 1->2, etc. There is a history of 20 log files available
This is the period, in which Neighbours and Statistics logs are saved in the archive and cleared
and new logs start from the beginning.
Note: The history files are organized in a ring buffer. Whenever a new file is opened, the numbers
of files are shifted, i.e. 0->1, 1->2, etc. There is a history of 20 log files available
Graphs
•
Parameters
List box: Default, Manual,
Default = Default
Default – Default (recommended) values are set and can't be edited.
Manual – Values can be set manually.
Graphs displays history of Watched values and history of some of the items from the Statistic table.
Displayed values are stored in each RipEX including data from selected five neighbouring units.
Neighbour = RipEX, which can be accessed directly over the Radio channel (not over Ethernet),
List box: Default, Manual,
Default = Default
Default – Default (recommended) values are set and can't be edited.
Manual – Values can be set manually.
Graphs displays history of Watched values and history of some of the items from the Statistic table.
Displayed values are stored in each RipEX including data from selected five neighbouring units.
Neighbour = RipEX, which can be accessed directly over the Radio channel (not over Ethernet),
RipEX Radio modem & Router – © RACOM s.r.o.
80
Advanced Configuration