BMI Technologies Inc. RFVI 用户手册

G FORCE PLUS RF Instruction Manual 

 

 

Apr/08

Doc #RF1 Rev.9 

c.  Complete the fields on the Vehicle Defaults tab.  These values will become default values for 

Vehicles assigned to this Authorization Group.  They can be changed for individual trucks if 
required in the Vehicle Settings tab. 

 

 

 

Motion Threshold: The sensitivity of the GForce unit to determine if the truck is in 
motion or not.  A lower number means less acceleration is required to get the GForce to 
sense motion. 
Motion Interval: The amount of time since the last start, stop, or direction change that 
the GForce will consider the truck in motion. 
Battery Nominal Voltage: If battery monitoring is enabled, the voltage that is expected 
of the battery. 
Hard/Soft Threshold: The amount of force, expressed in Gs, it takes for the GForce to 
register a Hard/Soft impact. 
Hard/Soft Samples: The amount of time (in milliseconds) the hard/soft thresholds need 
to be exceeded before the truck goes into Impact Alarm.  Do not alter these in most 
circumstances. 

 

 

3.  Click the [OK] button to save the changes. 

 

 
The Vehicle Inspection Checklist for an Authorization Group is created by selecting from a list of 32 
system-defined items, as well as adding up to 8 user-defined (custom) items.  Each selected item is 
displayed on the 2x16-character Vehicle Interface and requires a {Pass} or {Fail} response. 
 
1.  Select an Authorization Group from the grid. 

2.  Click on the Select Inspection List tab at the bottom of the Authorization Group tab. 

3.  Check the desired system-defined inspection items.  These will display on the Vehicle Interface 

in the order selected from top left to bottom right.