L-3 Communications Aydin Corporation 6000-8501900 用户手册
P
AGE
4 • GSM T
ERMINAL
U
SER
G
UIDE
1. Install Antenna
Figure 6. Connecting and tightening the antenna.
• Install the antenna onto the threaded
connector on the side of the GSM Terminal.
• Tighten the connector by hand only.
• Turn the antenna to a vertical or near-vertical
• Turn the antenna to a vertical or near-vertical
orientation.
2. Install internal back-up battery
• Locate the battery door on the top rear of
the subscriber unit and remove it by pressing
in and then up on the arrows. The door will
“hinge” open for removal (Figure 7).
Figure 7. Battery cover removal
• Press the battery (velcro-tape side down) to
hold the battery in place within the case.
Figure 8. Battery placement
• Connect the socket of the battery wire to the
plug located inside the battery compartment.
Note: The included battery may be partially
charged. The terminal must still be connected