TP-Link Technologies Co. Ltd. TDW8151N 用户手册
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
4
Chapter 2 Hardware Installation
2.1 The Front Panel
Figure 2-1
The LEDs, locating on the front panel, indicates the device’s working status. For details, please
refer to LED Explanation.
refer to LED Explanation.
LED Explanation:
Name
Status
Indication
Off
Power is on.
Power
On
Power is off.
On
The LINE port is linked up.
Flash
The ADSL negotiation is in progress.
ADSL
Off
The LINE port is linked down.
On
A successful PPP connection has been built.
Flash
Data is being transferred over the Internet.
Internet
Off
There is no successful PPP connection or the Router works on
Bridge mode.
Bridge mode.
On
The wireless function is enabled but no data is being transmitted.
Flash
There is wireless data being transmitted.
WLAN
Off
The wireless function is disabled.
On
There is a successful connection on the LAN port but no activity.
Flash
Data is being transferred over the LAN port.
LAN
Off
There is no connection on the LAN port or the connection is
abnormal.
abnormal.
Flash
A wireless device is connecting to the network by QSS function.
This process will last in the first 2 minutes.
This process will last in the first 2 minutes.
QSS
On
A wireless device has been successfully added to the network by
QSS function.
QSS function.
)
Note:
After a device is successfully added to the network by QSS function, the QSS LED will keep on for
about 5 minutes and then turn off.
about 5 minutes and then turn off.