SPRINGCARD SAS PRNHSP01 用户手册
PMD2271-BA
page 103 of 118
S
PRING
C
ARD
PC/SC C
OUPLERS
- H663
GROUP
- Developer's reference manual
7.4.3.
Behaviour of the contactless slot in PC/SC mode
This register defines the behaviour of the H663's contactless slot in PC/SC mode.
Address:
h
B3 – Size: 1 byte
Bit
Action if set
Note
msb
7
Innovatron: return the “real” T=0 ATR
(as supplied in REPGEN) instead of
building a pseudo ATR
building a pseudo ATR
Setting this bit breaks the compatibility
with MS CCID driver, because the card
is connected in T=1 where its ATR
is connected in T=1 where its ATR
claims it is T=0 only
6
Use only standard values for PIX.NN in
the ATR
Numerous contactless PICCs/VICCs
have not been registered by their
vendor in the PC/SC specification to
vendor in the PC/SC specification to
get a standard PIX.NN.
SpringCard has defined vendor-specific
SpringCard has defined vendor-specific
values for those cards (see 4.1.5).
If this bit is set, these non-standard
If this bit is set, these non-standard
values will not be used, and PIX.NN will
be fixed to
be fixed to
h
0000 for all PICCs/VICCs
that are not in the standard.
5
Disable the pause in RF field after the
PICC/VICC has been removed
When the PICC/VICC stops responding,
the H663 pauses its RF field for 10 to
20ms. Setting this bit disable this
20ms. Setting this bit disable this
behaviour.
4
Disable the pause in RF field after the
PICC/VICC during the polling
During the polling sequence, the H663
pauses its RF field for 10 to 20ms
between the polling loops. Setting this
between the polling loops. Setting this
bit disable this behaviour.
3
No NFC-DEP activation over Felica
(ISO 18092 @ 212 or 424 kbit/s)
2
No NFC-DEP activation over ISO
14443-A (ISO 18092 @ 106 kbit/s)
1
No T=CL (ISO-DEP) activation over ISO
14443-B
Send SLOT CONTROL P1,P2=
h
20,01 to
activate the PICC manually
lsb
0
No T=CL (ISO-DEP) activation over ISO
14443-A
Send SLOT CONTROL P1,P2=
h
20,02 to
activate the PICC manually
Default value:
h
00 (T=CL active over 14443 A and B, NFC-DEP active over 14443 A and Felica)
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.