SPRINGCARD SAS PRNHSP01 用户手册

PMD2271-BA

page 98 of 118

PRING

ARD

PC/SC C

OUPLERS

- H663

GROUP

- Developer's reference manual

7. C

ONFIGURATION

REGISTERS

The H663 features a non-volatile memory to store its configuration.
The memory is divided into “registers”. Every register is identified by its address (a 1-B value) and
is documented in this chapter.

Warning 1
Some registers are not listed in this chapter, yet they may have been defined in factory, or should

use the default value for correct operation. Do not write or erase any register that is not listed in
this chapter.

Warning 2

The non-volatile memory has a limited write/erase endurance.
Writing a different value in a configuration register more than 100 times may permanently

damage your product.

7.1. E

DITING

COUPLER

CONFIGURATION

7.1.1.

By software

The coupler's configuration registers are made available through a SCardControl function call.
Refer to § 6.3.6 for details.
The configuration is loaded upon reset. To apply the new configuration, the software shall
prompt the user to reset or unplug/plug the H663.

7.1.2.

Using SpringCard MultiConf software

SpringCard has developed a versatile configuration software

that covers most products,

including the H663 and all readers in the H663 family.
Download SpringCard MultiConf at

http://www.springcard.com/en/download/find/file/sn14007

Available for the Windows platform only.

SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.

All other brand names, product names, or trademarks belong to their respective holders.

Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.