Intelicis Corporation CEDAR880AG 用户手册

 

                                                                                 

                                                                                

Cedar 880AG Enterprise Dual-Radio AP/Bridge

 

 

 
 
Mode: 

DHCP: If DHCP is chosen, a dynamic IP address is assigned to AP by the DHCP 
Server. In addition, the subnet mask, default gateway and DNS server addresses are 
also assigned. Because DHCP assigns the IP address dynamically, different IP 
addresses may be assigned to the AP after each reboot. 
 
Static: In order to have full control of the IP address, the administrator may choose 
to use the Static IP. If Static mode is chosen, the administrator assigns the static IP 
address, subnet mask, default gateway and DNS server address for the AP. The AP 
will always have the same IP address after each reboot.  
 

For DHCP mode:  The DHCP Server assigns a dynamic IP address to the AP. 
For Static mode:  Enter the static IP address for the AP. 
 

For DHCP mode:  The DHCP Server assigns a network mask to the AP. 
For Static mode:  Enter the network mask for the AP. 
 

For DHCP mode:  The DHCP Server assigns a default gateway to the AP. 
For Static mode:  Enter the default gateway for the AP. 
 

By default, VLAN support is disabled. All packets sent by the AP are untagged. To 
enable VLAN support, click tagged and enter a VID value between 0 and 4095. 
Before enabling VLAN support, the VLAN setting needs to be pre-configured on a 
VLAN-aware switch, such as the Intelicis Cypress 1024. 

                                                                       

 

 

 

 30