Mitel Deutschland GmbH 68635RFP36U-01 用户手册
Configuration and Administration
231
7.5.5.1 Booter LED Status
RFP 35/36 IP, RFP 43 WLAN
The RFP 35/36 IP and RFP 43 WLAN booter uses LED1 for signaling its activity. After power up, the
LED 1 (INFO) is red. The successful start of the boot image is signaled by the LED 1 turning orange.
The RFP 35/36 IP and RFP 43 WLAN booter uses LED1 for signaling its activity. After power up, the
LED 1 (INFO) is red. The successful start of the boot image is signaled by the LED 1 turning orange.
RFP 32/34 IP, RFP 32/34 NA, RFP 42 WLAN
The following table illustrates the different meaning of the LEDs while the booter is active.
The following table illustrates the different meaning of the LEDs while the booter is active.
LED1 (INFO) LED2 (OMM /
SYSTEM)
LED3
(DECT)
LED4
(WLAN)
Booter cont.
Power connected
cont.
cont.
cont.
cont.
Wait for OMM Configurator
Input
Input
1s
1s
DHCP
1,9s
0,1s
cont.
cont.
cont.
DHCP failed, wait for OMM
Configurator Input
Configurator Input
0,25s
0,25s
TFTP download after DHCP
0,25s
0,25s
cont.
TFTP download after local
configuration
configuration
0,25s
0,25s
cont.
TFTP download after DHCP
Multicast
Multicast
0,25s
0,25s
cont.
cont.
TFTP download after local
configuration and multicast
configuration and multicast
3,9s
0,1s
cont.
cont.
cont.
TFTP failed, wait for OMM
Configurator Input
Configurator Input
Now, the kernel / application is running: LED1 will never be RED
7.5.5.2 Application LED Status
The following tables illustrate the different meaning of the LEDs while the application is starting or active.
The following tables illustrate the different meaning of the LEDs while the application is starting or active.
RFP 35/36 IP, RFP 43 WLAN
LED1 (INFO) LED2 (OMM /
SYSTEM)
LED3 (DECT) LED4 (WLAN)
Kernel
cont.
kernel boot phase
(inflator, …)
(inflator, …)
RFPM
1s
1s
DHCP phase
1,85s 0,5s
DHCP failure (idle
loop)
loop)
0,5s
0,5s
obtaining external
configuration
configuration
0,85s 0,15s
external configuration
failure
failure
cont.
Ready