Ophir Optronics Ltd QSR 用户手册
Chapter 3 – Getting Started
Understanding the Application Window
The Statistics Area
The Statistics Area displays statistics for the current session, as the
measurements are being taken. Table 3-1 lists the statistics that are shown.
measurements are being taken. Table 3-1 lists the statistics that are shown.
Table 3-1 The Statistics Area
Statistic Description
Min
Displays the minimum measurement taken.
Max
Displays the maximum measurement taken.
Average
Displays the average measurement taken.
Std. Dev.
Displays the standard deviation.
Overrange
Displays the number of readings measured that
were over the maximum value for the chosen
range.
were over the maximum value for the chosen
range.
When a reading is over the maximum value for
the chosen range,
the chosen range,
OVER
is displayed in the
Numeric Display Area in blue. When the head is
in its top range
in its top range
OVER
is displayed in red to
indicate that damage might occur to the head.
Readings
(Thermopile heads in Energy
Mode and pyroelectric and
PD10 heads in power or energy
modes)
(Thermopile heads in Energy
Mode and pyroelectric and
PD10 heads in power or energy
modes)
Displays the total number of measurements
taken.
taken.
Frequency
(Pyroelectric and PD10 heads
only)
(Pyroelectric and PD10 heads
only)
Frequency at which the laser is firing.
Missing Pulses (Pulsar with
Pyroelectric and PD10 heads
only)
Pyroelectric and PD10 heads
only)
Displays the number of missing pulses detected
when using External Trigger in Rising/Falling
Edge mode.
when using External Trigger in Rising/Falling
Edge mode.
The Measurement Parameters Area
The Measurement Parameters Area is used to configure measurement settings.
For information on configuring measurement settings for the various types of
heads, refer to Chapter 4 – Measuring with the Thermopile Head, Chapter 5 –
Measuring with the Photodiode Head and Chapter 6 – Measuring with the
Pyroelectric and PD10 Heads.
For information on configuring measurement settings for the various types of
heads, refer to Chapter 4 – Measuring with the Thermopile Head, Chapter 5 –
Measuring with the Photodiode Head and Chapter 6 – Measuring with the
Pyroelectric and PD10 Heads.
The Logging Area
The Logging Area is used to configure log file settings and to start and stop the
log. For information on working with log files, refer to Chapter 9 – Working with
Log Files.
log. For information on working with log files, refer to Chapter 9 – Working with
Log Files.
StarLab User Guide
19