Corning Optical Communication Wireless MAVELTE700L 用户手册
VCU Unit Installation and Provisioning
LTE 700 MHz MobileAccessVE Instant Coverage Solution User Manual
30
Note: The MIMO DL CF parameter is Read Only and pre-defined for the supported 10 MHz
block. The MIMO DL CF parameter defines the same DL central frequency from the Base
Station for Channel 1 and Channel 2.
block. The MIMO DL CF parameter defines the same DL central frequency from the Base
Station for Channel 1 and Channel 2.
2. Define Max expected power of BTS (0-33dBm).
3. Define UL System Gain (-15 to 5dB)
Notes:
1. Max expected Pin parameter can be obtained from your service provider.
2. The remaining parameters are predefined to their default values. (Service Bandwidth is
1. Max expected Pin parameter can be obtained from your service provider.
2. The remaining parameters are predefined to their default values. (Service Bandwidth is
set to 10MHz per channel).
3. Any updates of the service definition (Service Mode) are sent to all connected VAPs.
To Configure the SISO RF Parameters:
Note: The RF tab is displayed for MIMO by default.
1. Select the Master VCU in the topology tree and select the SISO option in the Service Mode
drop-down list. The RF parameters tab will display the SISO RF parameters.
2. Define Max expected power of BTS (0-33dBm).
3. Define UL System Gain (-15 to 5dB)
Service Mode
drop-down list