Netgear 14300289 用户手册

If the WiFi bridge/extender does not save the changes you make through the NETGEAR 
genie screens, check the following:

When you enter configuration settings on a screen, always click the Apply button before 
you move to another screen or tab, or your changes are lost. 

Click the Refresh or Reload button in the web browser. The changes might have 
occurred, but the old settings might be in the web browser’s cache.

If you are having trouble connecting wirelessly to the WiFi bridge/extender, try to isolate the 
problem by checking the following: 

Does the wireless device or computer that you are using find your wireless network?

If not, check the WiFi LED on the front of the WiFi bridge/extender. It should be lit. If it is 
not, you can press the WiFI On/Off button on the front of the WiFi bridge/extender to turn 
the WiFi bridge/extender’s wireless radio back on.

If you disabled the WiFi bridge/extender’s SSID broadcast, your wireless network is 
hidden and does not display in your wireless client’s scanning list. By default, SSID 
broadcast is enabled.

Does your wireless device support the security that you are using for your wireless 
network (WEP, WPA, or WPA2)?

If you want to view the wireless settings, select Setup > Wireless Settings. For more 
information, see 

22.

If your wireless device finds your network, but the signal strength is weak, check these 
conditions:

Is your WiFi bridge/extender too far from your computer, or too close? Place your 
computer near the WiFi bridge/extender, but at least 6 feet (2 meters) away, and see 
whether the signal strength improves.

Is your wireless signal blocked by objects between the WiFi bridge/extender and your 
computer?