Microsoft Corporation BH-905 用户手册
G e t s t a r t e d
7
headset to the device (see “Pair and connect the headset to a Bluetooth
device”, p. 9).
device”, p. 9).
If you plug the CA-143U audio cable into the headset when the headset
is connected to a Bluetooth device, the device is disconnected and
Bluetooth connectivity is deactivated.
is connected to a Bluetooth device, the device is disconnected and
Bluetooth connectivity is deactivated.
Connect using the audio cable
The headset is supplied with the Nokia CA-143U audio cable. The
headset may also be supplied with adapters to connect the cable to
different devices. To extend the length of the audio cable, use the CA-
144U extension cable.
headset may also be supplied with adapters to connect the cable to
different devices. To extend the length of the audio cable, use the CA-
144U extension cable.
To connect the headset to a device that has the Nokia 3.5 mm AV
connector, plug the audio cable into the headset and the AV connector.
connector, plug the audio cable into the headset and the AV connector.
To connect the headset to a device that has a standard 3.5 mm audio
connector, plug the audio cable into the headset and the AD-63
adapter, and insert the adapter into the audio connector.
connector, plug the audio cable into the headset and the AD-63
adapter, and insert the adapter into the audio connector.
To connect the headset to a device that has the Nokia 2.5 mm AV
connector, plug the audio cable into the headset and the AD-52
adapter, and insert the adapter into the AV connector.
connector, plug the audio cable into the headset and the AD-52
adapter, and insert the adapter into the AV connector.
To connect the headset to a home stereo system that has a standard
6.3 mm headphone connector, plug the audio cable into the headset
and the AD-70 adapter, and insert the adapter into the headphone
connector.
6.3 mm headphone connector, plug the audio cable into the headset
and the AD-70 adapter, and insert the adapter into the headphone
connector.
To connect the headset to an airplane audio system that has a 3.5 mm
headphone connector, plug the audio cable into the headset and the
AD-71 adapter, and insert the adapter into the headphone connector.
headphone connector, plug the audio cable into the headset and the
AD-71 adapter, and insert the adapter into the headphone connector.
■ Charge the battery
Before you can connect the headset to a Bluetooth device or use active
noise cancellation, you must charge the battery.
noise cancellation, you must charge the battery.
Before charging the battery, carefully read “Battery and charger
information”, p. 15.
information”, p. 15.
9216273_en1.fm Page 7 Tuesday, May 26, 2009 12:02 PM