Schulte-Schlagbaum AG SOT02 用户手册
SAG
SAFE-O-TRONIC
Installation
Schulte- Schlagbaum AG
Page 8 of 14
SOT-manual.DOC
4.3. Configuring for standard/daylight saving time "DSTKey"
The DSTKey (Daylight Saving Time Key) is used to configure both switchover points for daylight
saving/standard time as well as the type of switchover in the SAFE-O-TRONIC. The switchover
rule for the time change is programmed on the DSTKey.
saving/standard time as well as the type of switchover in the SAFE-O-TRONIC. The switchover
rule for the time change is programmed on the DSTKey.
By default the time change rule of Central Europe (Begin: last Sunday in March; End: last Sunday in
October) are programmed on DSTKey.
October) are programmed on DSTKey.
For Changing the time change rule please ask you authorised megalock system partner.
Operation:
1. Activate megalock (push rotary knob)
2. Present DSTKey. The megalock-s stores the changeover points and indicates this by
flashing the green LED
NOTE:
When starting up the SAFE-O-TRONIC, be sure that the time change is configured using the
DSTKey before the internal clock is set by the ClockSetKey. Otherwise the time of day may
be changed according to the specified changeover rule after the DSTKey is used.
When starting up the SAFE-O-TRONIC, be sure that the time change is configured using the
DSTKey before the internal clock is set by the ClockSetKey. Otherwise the time of day may
be changed according to the specified changeover rule after the DSTKey is used.
4.4.. Setting time of day and date "ClockSetKey"
The ClockSetKey is used to set the real time clock integrated into the SAFE-O-TRONIC to the cur-
rent date and time of day.
rent date and time of day.
NOTE:
•
The megalock-s only accepts the ClockSetKey if the internal realtime clock was acti-
vated when configuring using the SetupKey
vated when configuring using the SetupKey
•
After replacing the battery in a SAFE-O-TRONIC you must reset its realtime clock if it is
active.
•
After the clock in the megalock-s has been set the megalock-s reaccepts the ClockSet-
Key only after an additional 2 minutes have expired.
Key only after an additional 2 minutes have expired.