Radwin Ltd. 5XACMD3CN 用户手册
FinM Deployment Guide
Release 4.2.46
3‐28
Configuring Transportation Mobile Units (TMUs)
Configuring the Radio Network
5. Click Configure Unit. The following window will appear:
Figure 3‐17: TMU ‐ First time Installation
6. Type: Select the radio type ‐ Train Radio, as shown in
7. Car: Select the name of the train car on which the unit is to be installed. A list of
these names are taken from those defined in the Trains tab, Car column, and come
from the selected line only. Its IP address will then appear next to the First
Installation window if there is no checkmark next to it.
from the selected line only. Its IP address will then appear next to the First
Installation window if there is no checkmark next to it.
8. Car Router: This shows the IP address of the router on the selected train car. this IP
address is defined in the Trains tab, Car Router IP column.
9. First Installation: For a first‐time installation, leave this option selected so the
default IP address will appear. Any actions taken will then affect this unit directly,
not the unit selected from the Car drop‐down menu list, nor will it use the Car
Router.
not the unit selected from the Car drop‐down menu list, nor will it use the Car
Router.
10. Click OK. The Configurator will take all parameters as shown in the Configurator that
are relevant for the selected TMU and carry out the action as determined by the
Download Software option you have selected (see
Download Software option you have selected (see
Download software:
on page
3‐
4
).
It may take about a minute to complete. You will receive one of the completion mes‐
sages described in
sages described in
To re‐configure a unit that is already installed in the field:
1. Repeat Steps see
1.
through see
8.
above, relying on your network’s connection to
the unit.
The background color of the device configuration window is the same color as
that defined in Line tab, Name column.
that defined in Line tab, Name column.
For Regualtor Approval Only